ASUS WL-500gp maršrutizatoriaus paruošimas darbui su MEZON

[Pirm0kas]

Pagaliau kaip ir užbaigiau instrukciją kaip priversti ASUS'us arba Dlinkus DIR-320 routinti Mezono internetą nuo nulio.

Palaikoma įranga: Asus WL-500 routeriai (t.y. WL-500gp, WL-500gpv2 arba WL-500W) arba D-Link DIR-320 ir Mezono Samsung SWC-U200 modemas.

Nuoroda: http://mezon.projektas.lt/

Pritaikymas SAT srityje nemenkas. Pasiėmus kokį pigesnį modelį, pvz. DIR-320 ir prijungus usb-com kabelį galima sharinti su com imtuvams arba tiesiog tieisiai per lan kabelį duoti internetą laniniams imtuvams. Investicija viso labo tėra 1 Lt už Mezon pigiausią planą ir ~200 už routerį.

[augism]

Maladiec!
Vaisingas darbas nudirbtas. Vertas forumo aukso fondo ir prirakinimo viršuje. Tikrai naudinga instrukcija.
Gaila, kad kol kas Radviliškyje Mezono nėra, o taip norėtųsi Teo į užpakalį įspirti

[tomakas]

Dar vienas aprasymas.

Nuoroda http://seculab.ru/dlink-320/

Konfigurasine eilute
>>>echo "(while true; do /usr/sbin/madwimax -qof --event-script=/opt/etc/madwimax/event.sh; sleep 10; done )&" >> /usr/local/sbin/post-boot

Keiciame i echo "(while true; do /usr/sbin/madwimax --ssid=@mezon.lt -qof --event-script=/opt/etc/madwimax/event.sh; sleep 10; done )&" >> /usr/local/sbin/post-boot

Bandyta su D-link DIR-320. Veikia.

[Pirm0kas]

Konfigurasine eilute
>>>echo "(while true; do /usr/sbin/madwimax -qof --event-script=/opt/etc/madwimax/event.sh; sleep 10; done )&" >> /usr/local/sbin/post-boot

Keiciame i echo "(while true; do /usr/sbin/madwimax --ssid=@mezon.lt -qof --event-script=/opt/etc/madwimax/event.sh; sleep 10; done )&" >> /usr/local/sbin/post-boot

Savajam gide aš taip nedariau ir nerekomenduoju daryti. Visiškai nelogiškai atrodo tas madwimax'o paleidimas amžiname cikle. Tik be reikalo ėda routerio procesorių ir tiek. Madwimax 0.11 versijoje jau galima paleisti kaip demoną su opcija -d ir suksis jis fone, o atsijungus Mezonui jis vėl prisijungs. Na bet veikia, žinoma, ir taip padarius.

[tomakas]

Konfigurasine eilute
>>>echo "(while true; do /usr/sbin/madwimax -qof --event-script=/opt/etc/madwimax/event.sh; sleep 10; done )&" >> /usr/local/sbin/post-boot

Keiciame i echo "(while true; do /usr/sbin/madwimax --ssid=@mezon.lt -qof --event-script=/opt/etc/madwimax/event.sh; sleep 10; done )&" >> /usr/local/sbin/post-boot

Savajam gide aš taip nedariau ir nerekomenduoju daryti. Visiškai nelogiškai atrodo tas madwimax'o paleidimas amžiname cikle. Tik be reikalo ėda routerio procesorių ir tiek. Madwimax 0.11 versijoje jau galima paleisti kaip demoną su opcija -d ir suksis jis fone, o atsijungus Mezonui jis vėl prisijungs. Na bet veikia, žinoma, ir taip padarius.

A tada dabar viskas aishku, perdarysim routeri pagal tavo gida.

[olesub]

mezon tai mezon, jis kolkas tik dideliuose miestuose. Mane domina ar palaikys dir-320 omniconecto modemus. skaiciau, kad palaiko. Bet ar visus?
Siaip uzsinorejo svogeris tokio gerio. pas ji dabar netboxas ir intera ima per siemens. viskas aisku sukasi gerai, bet jam tenka rinktis ar ziuri tv, ar jungia prie pc. todel ir uzsinorejo to dir-320 kad galetu tuo paciu metu ir tv ir pc naudoti.

[augism]

mezon tai mezon, jis kolkas tik dideliuose miestuose. Mane domina ar palaikys dir-320 omniconecto modemus. skaiciau, kad palaiko. Bet ar visus?
Siaip uzsinorejo svogeris tokio gerio. pas ji dabar netboxas ir intera ima per siemens. viskas aisku sukasi gerai, bet jam tenka rinktis ar ziuri tv, ar jungia prie pc. todel ir uzsinorejo to dir-320 kad galetu tuo paciu metu ir tv ir pc naudoti.

Šiaip, tokiu atveju nebūtinas USB modemas, kaip flashkė, skaičiau, kad gali imti bet kokį telefoną su USB kabeliu, ir pirmyn: telefonas naudojamas kaip USB modemas.

[olesub]

nu tada neblogai tik nezinia ar tures svogeris koki tlf su usb laidu. Iskilo kita problema - realiai iki 180 lt ju niekas neturi, visur tures tik po keliu savaiciu, yra tik virs 300 lt

[olesub]

pirksiu tik uz protinga kaina (ne to spekulianto televizijavisiem, kuris turbut supirko visus likucius) dir-320

[S.O.S.]

Didelis aciu - veikia puikiai (jau savaite pas mane).
Turiu pora klausimeliu.
Ar galima padaryti, kad veiktu per usb huba (pas mane dir-320, tai dar galeciau printeri prikabinti). As bandziau, ant hubo lemputes mirksi, bet modemas neprisijungia.
Kaip teisingai sukonfiguruoti tuos DNS. Pas mane ju automatiskai negauna, o suvedus rankutem i routeri, ir kitiem automatiskai nepadalina tvarkingai (kol i kompa neivedziau rankiniu nustatymu kartais reikedavo routeri perkrauti)
Gal galima kazkaip isjungti ta didele melyna lempute ant mezono modemo

Pagaliau kaip ir užbaigiau instrukciją kaip priversti ASUS'us arba Dlinkus DIR-320 routinti Mezono internetą nuo nulio.

Palaikoma įranga: Asus WL-500 routeriai (t.y. WL-500gp, WL-500gpv2 arba WL-500W) arba D-Link DIR-320 ir Mezono Samsung SWC-U200 modemas.

Nuoroda: http://mezon.projektas.lt/

Pritaikymas SAT srityje nemenkas. Pasiėmus kokį pigesnį modelį, pvz. DIR-320 ir prijungus usb-com kabelį galima sharinti su com imtuvams arba tiesiog tieisiai per lan kabelį duoti internetą laniniams imtuvams. Investicija viso labo tėra 1 Lt už Mezon pigiausią planą ir ~200 už routerį.

[nerux]

Gal kas yra bandęs pritaikyt prie TEO modemo Pirelli tą mezoną?

[a95]

Ir i kur ta mezona ikisi

[nerux]

Ir i kur ta mezona ikisi

Nu matai aš tik užklausiau jai nėr galimybės tada viskas aišku

[Tomyto]

tas linkas sugedes gal kas galit mestelt ta instrukcija?

[partinis]

idesiu i failu talpykla "Mezon 4G Router arba Mezonas jūsų maršrutizatoriuje už dyką!"

[partinis]

ieskau pirkt asusiuko mezonui, gal kas turi?

[Pirm0kas]

tas linkas sugedes gal kas galit mestelt ta instrukcija?

Nesugedęs, tiesiog užmiršau apmokėti vakar (kaip tik iki 22-os dienos galiojo)

Vėl veikia: http://mezon.projektas.lt/

[litas]

tas linkas sugedes gal kas galit mestelt ta instrukcija?

Nesugedęs, tiesiog užmiršau apmokėti vakar (kaip tik iki 22-os dienos galiojo)

Vėl veikia: http://mezon.projektas.lt/

Aciu!

[Tomyto]

dekui

[Tomyto]

Dar eitu com is tu ruteriu isvesti ir mpcsa pakurti tai butu isvis idealu

[Pirm0kas]

Dar eitu com is tu ruteriu isvesti ir mpcsa pakurti tai butu isvis idealu

O tai kam su tuo knistis? Galima juk usb-com adapterį įkišti - ir turim com portą...

Šiaip esu parašęs panašią instrukciją: http://openbox.info/forum/viewtopic.php?t=8299

[algis82]

Hardware

CPU : Broadcom BCM5354KFBG
Flash : Spansion S29AL032D (4Mbytes)
RAM : 32Mbytes SAMSUNG
Switch : ?
Wi-Fi : BCM4318
Serial : yes
USB : yes
JTAG : yes

Serial pinout

[x] : TX
[x] : GND
[x] : VCC 3.3V
[ ]
[x] : RX

BootLog

Decompressing...........done
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Jul 19 10:53:24 CST 2007 (root@redhat9)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
Boot partition size = 262144(0x40000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.3.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes
Total memory used by CFE: 0x80300000 - 0x803C0720 (788256)
Initialized Data: 0x80337730 - 0x8033AE50 (14112)
BSS Area: 0x8033AE50 - 0x8033C720 (6352)
Local Heap: 0x8033C720 - 0x803A0720 (409600)
Stack Area: 0x803A0720 - 0x803C0720 (131072)
Text (code) segment: 0x80300000 - 0x80337730 (227120)
Boot area (physical): 0x003C1000 - 0x00401000
Relocation Factor: I:00000000 - D:00000000
alpha bootcode ver 0.1.2
cmd = ifconfig eth0 -addr=192.168.0.1 -mask=255.255.255.0
We disable the arp for self.
We disable the arp for self.
Device eth0: hwaddr 00-1B-11-34-0B-24, ipaddr 192.168.0.1, mask 255.255.255.0
gateway not set, nameserver not set
cmd = go;
cmd = load -raw -addr=0x803c0720 -max=0x3a0000 :
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Dest=80001000, source =803c0720, filename=flash1.trx
image_head_Check OK
magic = 20040220
image size = 3563552
devname = /dev/mtdblock/2
digest check OK!!
insize = 1048576, out size =8388608
uncompressed size = 2232320
lzma decompress success !
Closing network.
Starting program at 0x80001000
CPU revision is: 00029029
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 16kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (tommy@enzo) (gcc version 3.2.3 with Broadcom modifications) #1 Wed Sep 10 13:25:05 CST 2008
no need to call nvram_init()
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock1 noinitrd console=ttyS0,115200
CPU: BCM5354 rev 3 at 240 MHz
Calibrating delay loop... 237.56 BogoMIPS
Memory: 30004k/32768k available (1957k kernel code, 2764k reserved, 132k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
HDLC line discipline: version $Revision$, maxframe=4096
N_HDLC line discipline registered.
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
ELBOX Physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
Flash device: 0x400000 at 0x1fc00000
ELBOX Physically mapped flash: squashfs filesystem found at block 960
Creating 8 MTD partitions on "ELBOX Physically mapped flash":
0x000f0080-0x003a6080 : "rootfs"
0x00040000-0x003e0000 : "upgrade"
0x00030000-0x00040000 : "rgdb"
0x003f6000-0x003f8000 : "bdcfg"
0x003e0000-0x003f0000 : "langpack"
0x00000000-0x00400000 : "flash"
0x00000000-0x00030000 : "Boot"
0x003f8000-0x00400000 : "nvram"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:03.1: PCI device 14e4:471a
ehci_hcd 00:03.1: irq 6, pci mem b8003800
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:03.1: illegal capability!
PCI: 00:03.1 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
host/usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Register ARP FLOOD sysctl entry successes!
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (256 buckets, 2048 max) - 344 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb>
All bugs added by David S. Miller <davem>
FAT: bogus logical sector size 51456
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 68k freed
init started: BusyBox v1.00 (2008.09.10-05:29+0000) multi-call binary
Starting pid 15, console /dev/tts/0: '/etc/init.d/rcS'
Algorithmics/MIPS FPU Emulator v1.5
[/etc/init.d/S03config.sh]
Mounting proc and var ...
Start xmldb ...
[/etc/scripts/misc/profile.sh] get ...
[/etc/scripts/misc/defnodes.sh] ...
[/etc/defnodes/S10setext.sh] ...
PHP [/etc/defnodes/S11setnodes.php] ...
PHP [/etc/defnodes/S12features.php] ...
PHP [/etc/defnodes/S13flashspeed.php] ...
PHP [/etc/defnodes/S20setnodes.php] ...
FAT: bogus logical sector size 17990
VFS: Can't find a valid FAT filesystem on dev 1f:05.
SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock(31,5)
mount: Mounting /dev/mtdblock/5 on /www/locale/alt failed: Invalid argument
PHP [/etc/defnodes/S40brand.php] ...
[/etc/scripts/misc/defnodes.sh] Done !!
[/etc/templates/timezone.sh] ...
zone : 5
gen : PST+08:00
[/etc/templates/logs.sh] ...
[/var/run/logs_run.sh] ...
Using /lib/modules/wl_apsta.o
no need to call nvram_init()
eth0: Broadcom BCM4318 802.11 Wireless Controller 4.150.10.5
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
[/etc/templates/webs.sh] start ...
[/var/run/webs_start.sh] ...
Starting HTTPD ...
/proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established: cannot create
[/etc/init.d/S03config.sh] done!
[/etc/init.d/S10system.sh]
start fresetd ...
Factory reset time : 5 secs
WPS command : [/etc/templates/wps.sh pbc &]
et interface not found
start scheduled ...
[/etc/templates/scheduled.sh] start ...
[/var/run/scheduled_start.sh] ...
Start scheduled ...
setup layout ...
[/etc/scripts/layout.sh] start ...
[/var/run/layout_start.sh] ...
et interface not found
Start router layout ...
Using /lib/modules/et.o
no need to call nvram_init()
eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.5
eth1.6: Setting MAC address to 00 1b 11 34 0b 23.
device eth1 entered promiscuous mode
VLAN (eth1.6): Setting underlying device (eth1) to promiscious mode.
eth1.0: Setting MAC address to 00 1b 11 34 0b 22.
eth1.8: Setting MAC address to 00 1b 11 34 0b 24.
VLAN (eth1.: Underlying device (eth1) has same MAC, not checking promiscious mode.
device eth0 entered promiscuous mode
eth1.0: dev_set_promiscuity(master, 1)
device eth1.0 entered promiscuous mode
br0: port 2(eth1.0) entering learning state
br0: port 2(eth1.0) entering forwarding state
br0: topology change detected, propagating
br0: port 1(eth0) multicast bandwidth 900kbps
start LAN ...
[/etc/templates/lan.sh] ...
[/var/run/lan_start.sh] ...
Start LAN (br0/192.168.0.1/255.255.255.0)...
Start DHCP server (br0) ...
Start igmp ...
[/etc/templates/igmpproxy.sh] start ...
[/var/run/igmpproxy_start.sh] ...
Start IGMP proxy ...
enable LAN ports ...
Nothing to enable LAN ports!
start WLAN ...
[/etc/templates/wlan.sh] start ...
[/var/run/wlan_start.sh] ...
Start WLAN interface eth0 ...
WPS: not found
eth0: Numerical result out of range
eth0: Invalid argument
eth0: Invalid argument
br0: port 1(eth0) entering learning state
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating
[/etc/templates/upnpd.sh] ...
[/var/run/upnpd_start.sh] ...
Starting UPnP ...
[/var/run/upnp_alive.sh] ...
Start WLAN interface eth0 Done !!!
Configuration file: /var/run/hostapd.eth0.conf
start Guest Zone
[/etc/templates/gzone.sh] ...
br0: port 1(eth0) entering disabled state
Using interface eth0 with hwaddr 00:1b:11:34:0b:22 and ssid 'dlink'
[/var/run/gzone_start.sh] ...
br0: port 1(eth0) entering learning state
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating
hostapd_setup_interface: return 0
[/etc/templates/enable_gzone.sh] ...
[/var/run/enable_gzone_start.sh] ...
start RG ...
[/etc/templates/rg.sh] start ...
[/var/run/rg_start.sh] ...
Using /lib/modules/sw_tcpip.o
REDSonic turbo net initialized
imq driver loaded.
Using /lib/modules/ifresetcnt.o
Network interface reset count v1.0
Using /lib/modules/ipt_string.o
Using /lib/modules/ip_stun_func.o
Register STUN module successes!
sendto_unsock(/var/run/portt.unixsocket, flush)
start DNRD ...
[/etc/templates/dnrd.sh] ...
[/var/run/dnrd_start.sh] ...
Start DNRD ...
Notice: caching turned off
Start telnetd ...
start UPNPD ...
[/etc/templates/upnpd.sh] ...
[/var/run/upnpd_stop.sh] ...
Stopping UPNPD ...
[/var/run/upnpd_start.sh] ...
Starting UPnP ...
[/var/run/upnp_alive.sh] ...
start WAN ...
Set WAN port media type 0
[/etc/templates/wan.sh] start ...
[/var/run/wan_start.sh] ...
It is the DHCP mod start!!
DHCP client on WAN(eth1. CloneMAC() ...
802.1x authentication is disabled !
Stop 802.1x Authentication on eth1.8...
killall: xsupplicant: no process killed
start LLD2D ...
[/etc/templates/lld2d.sh] ...
[/var/run/lld2d_start.sh] ...
Start LLD2 daemon ...
start Neaps ...
[/etc/templates/neaps.sh] start ...
[/var/run/neaps_start.sh] ...
Start Neap Server ...
start lpd ...
[/etc/templates/lpd.sh] ...
killall: lpd: no process killed
killall: rawlpd: no process killed
shiang(1038): Set_lpd_pid(5)
shiang_lpd:s=515, Lpd_listen_port_DYN=(null), Lpd_port_DYN=515
shiang_Ipp:s=off, Ipp_listen_port_DYN=off
shiang_Unix:s=/var/run/lprng, Unix_socket_path_DYN=/var/run/lprng
start igmpproxy ...
[/etc/templates/igmpproxy.sh] start ...
1039: the pid_str=1039 pofd 17 17!
1039: jobQueue_Init success!
1039: Into printer_Hotplug_Action()!
1039: After reset pDev_Queue, we check each entries!
[/var/run/igmpproxy_stop.sh] ...
Stop IGMP proxy ...
[/etc/templates/igmpproxy_helper.sh] flush ...
[/var/run/igmpproxy_helper.sh] ...
[/etc/templates/rg.sh] misc ...
[/var/run/rg_misc.sh] ...
1039: pclose!
1039: create socket success!
1039:The unix socket file path=/var/run/pof.d
p9100d daemon
server in ..
after fork ..
[/var/run/igmpproxy_start.sh] ...
Start IGMP proxy ...
start usb plugplay ...
[/etc/init.d/S10system.sh] done!
rcS done!
Starting pid 1118, console /dev/tts/0: '/bin/sh'
BusyBox v1.00 (2008.09.10-05:29+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

Compile image

Add 2 lines to ./target/linux/brcm-2.4/config-default

CONFIG_MTD_CFI_B1=y
CONFIG_MTD_CFI_I2=y
--
make menuconfig
select target system "Broadcom BCM947xx/953xx [2.4]"
select you need packages
select <Exit> and "Yes"
run make

Flashing

Serial

flash -noheader <ip>: openwrt-brcm-2.4-squashfs.trx flash1.trx

Windows
http://www.shadowandy.net/2008/06/flash ... ir-320.htm

' Set IP addr of LAN interface = 192.168.0.2
' attach computer ( recomended use switch ) and lan1 port on the device
' Run script: <script_file_name> <firmware_file_name>
@Echo Off
set DEFAULT_FW=firmware.bin
set FMFILE=%1
if X"%FMFILE%" == X"" (
set FMFILE=%DEFAULT_FW%
)

if NOT EXIST %FMFILE% (
echo.
echo ERROR: File %FMFILE% does not exist
GOTO HELP
)
Goto BEGIN
:HELP
echo.
set FW_PARAM=firmware_file
echo Use %0 [%FW_PARAM%]
echo By default %FW_PARAM% is %DEFAULT_FW%

Goto END
:BEGIN
echo ============================================
ping -n 1 -w 10 192.168.0.1
If ERRORLEVEL 1 Goto BEGIN
If ERRORLEVEL 0 Goto FLASH
Goto END
:FLASH
echo ============================================
echo *** Start Flashing ****
tftp -i 192.168.0.1 put firmware.bin
:END

[algis82]

D-Link DIR-320

[dzin]

Ka tik pakonvertavau savo dir-320 i ASUS WL-500gpv2 - su windowsais nieko neisejo o pasileidau per ubuntu - uzteko siu komandu (sugaisau pora minuciu ir vsio - su windows krapsciausia gal trejeta valandu ir nepavyko): http://www.shadowandy.net/2008/06/flash ... ir-320.htm

taigi patarimas - jeigu turit asus - firmware upgrade darot per internetine narsykle. Jeigu turite dlink dir-320 - firnware upgrade darote per ubuntu ;)

beje del to viso programinimo tai man atrodo su naujaja versija http://code.google.com/p/wl500g/downloads/list (man tinkamas WL500gpv2-1.9.2.7-d-r1000.trx ) net neriekia programavimo - uzeinat per internet narsykle susirandat kazkur ten Wimax zymit autorun yes ir ten dar reikia irasyti prie ssid sita- @mezon.lt

dabar po ranka USB modemo neturiu bet grizes paziuresiu ir parasysiu kaip sekesi.

[eray]

Ka tik pakonvertavau savo dir-320 i ASUS WL-500gpv2 - su windowsais nieko neisejo.

Spėju turi Windows Vista/7 , kurie po defaultu neturi TFTP ir telnet klientų.