hallo leute,
vielleicht hat hier jemand eine idee zu folgendem problem:
vorgestern neue firmware für x-820 aufgspielt, alles o.k.
gestern dann kein empfang angezeigt
woran könnte das liegen?
kein signal mehr
Moderatoriai: nerux, cvykas, vytas121
-
- Forumietis
- Pranešimai: 10
- Užsiregistravo: Ket Bir 07, 2007 10:12 am
- Susisiekti:
-
- Forumietis
- Pranešimai: 10
- Užsiregistravo: Ket Bir 07, 2007 10:12 am
- Susisiekti:
Re: kein signal mehr
in english:gabor1 rašė:hallo leute,
vielleicht hat hier jemand eine idee zu folgendem problem:
vorgestern neue firmware für x-820 aufgspielt, alles o.k.
gestern dann kein empfang angezeigt
woran könnte das liegen?
may be someone here has a solution for the following problem:
the day before yesterday I have installed the new firmware for x-820 and everything was o.k.
then yesterday the comment on the screen was "no signal" the menues were still there but no station available
could it be a problem with the software or hardaware?
-
- Forumietis
- Pranešimai: 1161
- Užsiregistravo: Šeš Gru 09, 2006 8:10 pm
- Miestas: palanga-lincolnshire
- Susisiekti:
-
- Forumietis
- Pranešimai: 10
- Užsiregistravo: Ket Bir 07, 2007 10:12 am
- Susisiekti:
to fix the problem you have
i had the same problem with the openbox 820 from a friend. it sounds that there is a bug on the new firmware . when i patched his box (i did it the same way than i did it with my box 820 5 minutes before) the box won`t get a signal , but my work .
i make a reset from the box patched the box again get the channels from my box and send them to his box now it work without a problem.
hope i can help with it
i make a reset from the box patched the box again get the channels from my box and send them to his box now it work without a problem.
hope i can help with it
-
- Forumietis
- Pranešimai: 68
- Užsiregistravo: Tre Lap 01, 2006 8:55 pm
- Susisiekti:
Re: kein signal mehr
Hi, hast du wirlich eine org. Openbox oder doch vielleicht einen Koscom SDC3510gabor1 rašė:hallo leute,
vielleicht hat hier jemand eine idee zu folgendem problem:
vorgestern neue firmware für x-820 aufgspielt, alles o.k.
gestern dann kein empfang angezeigt
woran könnte das liegen?
Solltest du einen Koscom haben , kann ich dir nur empfehlen, diesen per JTAG auf einen X-820 um zu wandeln. Erst dann laufen die Geräte stabil.
regards
-
- Forumietis
- Pranešimai: 10
- Užsiregistravo: Ket Bir 07, 2007 10:12 am
- Susisiekti:
Re: kein signal mehr
ne ist ein x-820 und das problem hat sich erledigt:tobmac rašė:Hi, hast du wirlich eine org. Openbox oder doch vielleicht einen Koscom SDC3510gabor1 rašė:hallo leute,
vielleicht hat hier jemand eine idee zu folgendem problem:
vorgestern neue firmware für x-820 aufgspielt, alles o.k.
gestern dann kein empfang angezeigt
woran könnte das liegen?
Solltest du einen Koscom haben , kann ich dir nur empfehlen, diesen per JTAG auf einen X-820 um zu wandeln. Erst dann laufen die Geräte stabil.
regards
also entwarnung lag nicht an der neuen firmware.
schüssel war verstellt
Dabar prisijungę
Vartotojai naršantys šį forumą: 0 ir 0 svečių