Sergejko rašė:tomhanks rašė:Samsung: 0648, 0617, 0208, 0067, 0586 ,0123, 0674, 0039 ,0247,
0478, 0400 ,0090, 0294, 0246, 0320, 0102, 0238, 0549,
0193 ,0655.
kodus aš radau. bet neparinkau tinkamo.
bandyk automatiniu turi buti kodai o gal kito brando tiks
versta googliskai:
Dream nuotolinio valdymo TV kodas
Jei bandėte visų steigti kodus savo prekės ženklą įrangos, ar jūsų prekės nėra sąraše, ir jūs vis dar negali gauti vieneto reaguoti, pabandykite šią procedūrą ieškoti kodą.
Jei nerandate kodo, kad darbai, nuotolinio mirksės keturis kartus, kai jūs pasieksite visus šio įrenginio tipo kodus pabaigos.
1. Įsitikinkite, kad jūsų televizorius yra įjungtas.
2. PRANEŠIMAS dėl prietaiso mygtuką norite programuoti, (TV), tada atleiskite.
3. Paspauskite ir laikykite nuspaudę SETUP mygtuką, kol raudonas šviesos diodas mirksi du kartus, tada atleiskite.
4. ENTER 9-9-1 (dvi mirksi nuotolinio)
5. Alternatyvių lėtai tarp çjungimo ir įtaisas (Televizija) mygtuką, kol jūsų prietaisas išsijungia.
Įsitikinkite, kad nuotolinio yra nurodė prietaiso per paiešką, gali tekti paspausti šį mygtuką sekas iki 100 kartų ieškoti visame biblioteka kodų.
6. Kai jūsų prietaisas išsijungia, paspauskite SETUP mygtuką ir atleiskite, kad būtų įtvirtinta kodas jūsų prietaisui
________________________________
Dream remote control your TV code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
1. Make sure your TV is switched on.
2. PRESS the button for the device you want to program, (TV), then RELEASE.
3. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
4. ENTER 9-9-1 (two blinks on the remote)
5. ALTERNATE slowly between the POWER key and the DEVICE (TV) button until your device turns off.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
6. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device